FEATURES & CONTROLS
41
Move the lock lever to the free position. Tilt the outboard to the
desired position and lock in place by moving the tilt lock lever back
to the lock position.
a - Free position b - Lock position
TILTING OUTBOARD TO FULL UP POSITION
1. Stop the engine. Move the lock lever to the free position. Take
hold of the top cowl grip and raise the outboard to the full tilt
up position. Lock the outboard in place by moving the lock
lever to the lock position.
2. Engage the tilt support lever.
3. Lower the outboard to rest on the tilt support lever.
LOWERING OUTBOARD TO RUN POSITION
1. Move the lock lever to the free position. Tilt up the outboard
slightly and release the tilt support lever. Lower the outboard
to the run position.
To Next Page
Loading...
