OUTBOARD INSTALLATION
eng 135
IMPORTANT: The idle stop screw must be touching the stop.
a - Idle stop screw
b - Idle stop
d. Adjust the cable barrel if necessary.
5. Lock the barrel holder in place with the cable latch.
FRONT CLAMP ASSEMBLY INSTALLATION
IMPORTANT: There must be sufficient slack in the engine wiring
harness, battery cables, fuel hose, and oil hoses, between clamp
and engine attachment point, to relieve stress and prevent hoses
from being kinked or pinched.
1. Place the lower half of the front clamp into the bottom cowl
opening.
To Next Page
Loading...
