Mercury 50 Operator's Manual

ii
General steering system ABYC P‑17
The following applies to all product covered by this manual:
Safety of Machinery Directive 98/37/EC
Principles of safety integration (1.1.2) EN 292‑1; EN 292‑2; EN 1050
Noise (1.5.8) ICOMIA 39/94
Vibration ICOMIA 38/94
Electromagnetic Compatibility Directive 89/336/EC
Generic emission standard EN 61000‑6‑3
Generic immunity standard EN 61000‑6‑1
Vehicles, boats and internal combustion
engine driven devices ‑ radio disturbance
characteristics
SAE J551 (CISPR 12)
Electrostatic discharge testing
EN 61000‑6‑2; EN 61000‑4‑2; EN
61000‑4‑3
This declaration is issued under the sole responsibility of Mercury Marine and Marine Power Europe.
Patrick C. Mackey
President, Mercury Marine, Fond du Lac, WI USA
European Regulations Contact:
Regulations and Product Safety Department, Mercury Marine,
Fond du Lac, WI USA

Mercury 50 Specifications

General

Horsepower	50 hp
Cylinders	3
Steering	Remote
Starting	Electric
Displacement	995 cc
Fuel Induction System	EFI (Electronic Fuel Injection)
Alternator Output	18 amp
Shaft Length	20" / 508 mm
Dry Weight	112 kg
Engine Type	4-Stroke