Mercury 50 User Manual

OPERATION
50
ob00361
Emergency Starting - Electric Start Models
If the starter system fails, use the spare starter rope (provided) and follow procedure.
!
WARNING
When using emergency starter rope to start engine, the start in gear protection device is inoperative. Make sure
to set the outboard gear shift into neutral to prevent outboard from starting in gear. Sudden unexpected
acceleration could result in serious injury or death.
1. Shift outboard to neutral (N) position.
N
ob00351
NN
3107
2. Set the lanyard stop switch to "RUN" position. Refer to General Information - Lanyard Stop Switch.
ob00350
3. Turn ignition key to "ON" position.
ob00364
4. Remove flywheel cover.

Mercury 50 Specifications

General

Horsepower	50 hp
Cylinders	3
Steering	Remote
Starting	Electric
Displacement	995 cc
Fuel Induction System	EFI (Electronic Fuel Injection)
Alternator Output	18 amp
Shaft Length	20" / 508 mm
Dry Weight	112 kg
Engine Type	4-Stroke