OUTBOARD INSTALLATION
eng 123
However, once on plane, the engine should be trimmed to a
more intermediate position to avoid a bow‑down planing
condition called plowing. Plowing can cause bow steering or
oversteering and inefficiently consumes horsepower.
a - Tilt pin (not included with engine)
Stainless Steel Tilt Pin 17‑49930A 1
Limits the down trim angle of the
power trim equipped engines, or
aids in determining the trim out
angle on non‑power trim
engines.
The owner may decide to limit the trim in. This can be
accomplished by purchasing a stainless steel tilt pin from your
dealer and insert it in whatever adjustment hole in the transom
brackets is desired. A nonstainless steel shipping bolt should not
be used in this application other than on a temporary basis.
To Previous Page
Loading...
Need help?
General
