Mercury 75 OptiMax User Manual

MAINTENANCE
66 eng
Cleaning Care for Top Cowl
IMPORTANT: Dry wiping (wiping the plastic surface when it is
dry) will result in minor surface scratches. Always wet the
surface before cleaning. Follow the cleaning and waxing
procedure.
CLEANING AND WAXING PROCEDURE
1. Before washing, rinse the top cowl with clean water to
remove the dirt and dust that may scratch the surface.
2. Wash the top cowl with clean water and a mild non‑abrasive
soap. Use a soft clean cloth when washing.
3. Dry thoroughly with a soft clean cloth.
4. Wax the surface using a non‑abrasive automotive polish
(polish designed for clear coat finishes). Remove the applied
wax by hand using a clean soft cloth.
Flywheel Cover Removal and Installation
REMOVAL
Lift the cover off the three mounting pins.

Mercury 75 OptiMax Specifications

General

Engine Type	2-stroke
Displacement	1526 cc
Horsepower	75 hp
Alternator	60 amp / 756 watt
Cylinders	3
Starting	Electric
Full Throttle RPM Range	5000-5750 rpm
Steering	Remote
Fuel Induction System	2-stage direct fuel injection
Shaft Length	20"
Weight	170 kg