Mercury 75 OptiMax User Manual

MAINTENANCE
eng 83
• Steering cable grease fitting (if equipped) ‑ Rotate
steering wheel to fully retract the steering cable end into
the outboard tilt tube. Lubricate through fitting.
!
WARNING
Incorrect cable lubrication can cause hydraulic lock, leading
to serious injury or death from loss of boat control.
Completely retract the end of the steering cable before
applying lubricant.
a - Fitting
b - Steering cable end
3. Lubricate the following with lightweight oil.
• Steering link rod pivot points ‑ Lubricate pivot points.
29480
Checking Power Trim Fluid
1. Tilt outboard to the full up position and engage the tilt
support lever.
27877
a
b
29479

Mercury 75 OptiMax Specifications

General

Engine Type	2-stroke
Displacement	1526 cc
Horsepower	75 hp
Alternator	60 amp / 756 watt
Cylinders	3
Starting	Electric
Full Throttle RPM Range	5000-5750 rpm
Steering	Remote
Fuel Induction System	2-stage direct fuel injection
Shaft Length	20"
Weight	170 kg