Mercury 75 User Manual

Identification of Engines Covered by This Declaration of Conformity
Name of engine family
Unique engine
identification
number(s) or engine
family code(s):
starting serial number
Module H
Certificate
1.5L OptiMax 75, 90, 115, 115
Pro XS, 125 hp, 80 Jet
0B228000 RCD‑H‑2 Rev 4
2.5L OptiMax 135, 150, 150
Pro XS, 175 hp
0B228000 RCD‑H‑2 Rev 4
3.0L OptiMax 200, 200 Pro XS,
225, 250 hp
0B228000 RCD‑H‑2 Rev 4
Essential
requirements
Standards
Other
normative
document/
method
Technical
file
Please specify in
more detail
(* = mandatory
standard)
Annex 1.B—Exhaust Emissions
B.1 Engine
identification
☐ ☐ ☒
B.2 Exhaust
emission
requirements
☒* ☐ ☐
* EN ISO
8178‑1:1996
B.3 Durability ☐ ☐ ☒
B.4 Owner's
manual
☒ ☐ ☐ ISO 8665: 2006
Annex 1.C—Noise Emissions
C.1 Noise
emission levels
☒* ☐ ☐ EN ISO 14509
C.2 Owner's
manual
☐ ☒ ☐ Owner's manual
This declaration of conformity is issued under the sole responsibility of the
manufacturer. I declare on behalf of the engine manufacturer that the engines
mentioned preceding complies with all applicable essential requirements in
the way specified.
ii eng

Mercury 75 Specifications

General

Horsepower	75 hp
Starting	Electric
Cylinders	3
Warranty	3 years
Shaft Length	20 in. or 25 in.