Mercury 8 User Manual

OPERATION
71
4. Remove the three screws holding the flywheel cover on.
a
b
a
a
c
28614
a - Flywheel cover
screws (3)
b - Recoil neutral
interlock
c - Fuse holder
5. Remove the flywheel cover.
6. Remote Control models ‑ Ensure the key switch is in the "ON"
position.
!
WARNING
High voltage is present any time the key is turned on, especially
when starting or operating the engine. Do not touch ignition
components or metal test probes and stay clear of spark plug
leads when performing live tests.
!
WARNING
The exposed moving flywheel can cause serious injury. Keep
your hands, hair, clothing, tools, and other objects away from
engine when starting or running the engine. Do not attempt to
reinstall the flywheel cover or top cowl when engine is running.
7. Refer to the appropriate starting procedure (cold or hot).

Mercury 8 Specifications

General

Full Throttle RPM	5000-6000 RPM
Cylinders	2
Gear Ratio	2.08:1
Horsepower	8 HP
Starting	Manual
Shaft Length	15 in, 20 in
Fuel Tank Capacity	External