Mercury 8 User Manual

ENGINE INSTALLATION
110
Assemble steering link rod to steering cable with flat washer and
nylon insert locknut. Tighten locknut until it seats, then back nut off
1/4 turn.
Assemble steering link rod to engine with bolt, locknut and spacer
and flat washers. Torque locknut to specifications.
Remote Wire Harness Connection
1. Remove the cover and cable receptacle bracket from the
bottom cowl.
a
28003
a - Cover
a
28107
a - Cable receptacle bracket

Mercury 8 Specifications

General

Full Throttle RPM	5000-6000 RPM
Cylinders	2
Gear Ratio	2.08:1
Horsepower	8 HP
Starting	Manual
Shaft Length	15 in, 20 in
Fuel Tank Capacity	External