ENGINE INSTALLATION
105
IMPORTANT: Check with your dealer before installing
accessories. The misuse of approved accessories or the use of
non‑approved accessories can damage the product.
Some accessories not manufactured or sold by Mercury Marine
are not designed to be safely used with your outboard or outboard
operating system. Acquire and read the installation, operation, and
maintenance manuals for all your selected accessories.
Installing Outboard
!
WARNING
Failure to correctly fasten the outboard could result in the
outboard propelling off the boat transom resulting in property
damage, serious injury, or death. Before operation, the outboard
must be correctly installed with the required mounting hardware.
Do not accelerate above idle speed in water that may contain
underwater obstacles if the outboard is not attached to the
transom correctly.
BOAT TRANSOM HEIGHT REQUIREMENT
1. Measure the transom height of your boat. The boat bottom
should be aligned or be within 25 mm (1 in.) above the
anti‑ventilation plate of the outboard.
To Next Page
Loading...
Need help?
General
