26
CE7
OWNER/OPERATOR RESPONSIBILITIES
It is the operator’s responsibility to perform all safety checks, ensure that all lubrication and maintenance instruc-
tions are complied with for safe operation, and return the unit to an Authorized Mercury MerCruiser Dealer for
a periodic checkup.
Normal maintenance service and replacement parts are the responsibility of the owner/operator and as such,
are not considered defects in workmanship or material within the terms of the warranty. Individual operating hab-
its and usage contribute to the need for maintenance service.
Proper maintenance and care of your power package will assure optimum performance and dependability, and
will keep your overall operating expenses at a minimum. See your Authorized Mercury MerCruiser Dealer for
service aids.
CAUTION
The injection pump lever Wide-Open-Throttle (WOT) Stop Screw adjusts the engine speed governor,
and is factory set and sealed. Readjusting the governed speed and operating above the specified RPM
will cause extensive engine damage and/or failure. Removal of the seal and/or readjustment of the
governed speed is considered misuse of engine, and resulting damages will not be covered by the
limited warranty.
CA14
DEALER RESPONSIBILITIES
In general, a dealer’s responsibilities to the customer include predelivery inspection and preparation such as:
• Make sure that the boat is properly equipped.
• Prior to delivery, make certain that the Mercury MerCruiser power package and other equipment are in proper
operating condition.
• Make all necessary adjustments for maximum efficiency.
• Familiarize the customer with the on-board equipment.
• Explain and demonstrate the operation of the power package and boat.
• At the time of delivery, the dealer should provide you with a copy of a Predelivery Inspection Checklist.
• Your selling dealer should fill out the Warranty Registration Card completely and mail it to the factory (branch
or distributor) immediately upon sale of the new product.
To Next Page
Loading...
Need help?
General