58
Maintenance Schedules (Continued)
Scheduled Maintenance
After
first 50
hours
Every
100
hours or
Annually
z
Every
200
hours or
Annually
z
Every
200
hours
or 2
years
z
Every
300
hours
or 3
years
z
Every
500
hours
or 5
years
z
Every
1000
hours
or 5
years
z
Change crankcase oil and filter. D D
Retorque exhaust riser clamp. D D
Change drive unit oil and retorque connection
of gimbal ring to steering shaft.
D
Replace fuel filter(s). D
Check steering system and remote control for
loose, missing or damaged parts. Lubricate
cables and linkages.
D
Inspect U-joints, splines, and bellows. Check
clamps. Check engine alignment. Lubricate
U-joints and splines.
D
Lubricate hinge pins, gimbal bearing and
engine coupler
*
D
Check continuity circuit for loose or damaged
connections. Test MerCathodeR unit output,
if equipped.
D
Drain condensation from intercooler. D
Lubricate driveshaft U-joints and tailstock
input and output bearings.
D
Touch-up paint power package and spray
with corrosion guard.
D
z Whichever Occurs First
* Lubricate engine coupler every 50 hours if operated at idle for prolonged periods of time.
To Next Page
Loading...
