Mercury FourStroke 2.5 User Manual

Tiller Handle
Page 7B-8 90-8M0065421 NOVEMBER 2012
3. Install the bushing and rubber shaft onto the throttle shaft.
a - Rubber shaft
b - Bushing
c - Throttle shaft
d - Throttle friction components
e - Tiller handle
4. Install the throttle cables through the slot in the tiller handle cover.
a - Tiller handle cover slot
b - Throttle cable ‑ deceleration
c - Throttle cable ‑ acceleration
5. Install the throttle cable ends in the throttle shaft drum.
a - Throttle shaft
b - Drum
c - Throttle cable ‑ deceleration
d - Throttle cable ‑ acceleration (with match mark)
6. Install the throttle shaft into the throttle handle.
7. Install the grip onto the tiller handle. Secure the grip with the screw.
8. Secure the throttle shaft with the bracket and screw.
26033
a e
b
c
d
26030
a
b
c
26031
a
b
c
d

Mercury FourStroke 2.5 Specifications

General

Brand	Mercury
Model	FourStroke 2.5
Category	Outboard Motor
Language	English