Mercury KOB KT266A FDSX - Installing the Processor

Checking Jumper Settings
The following illustration shows the location of the mainboard jumpers. Pin 1 is
labeled.
Jumper Settings
Jumper Type Description Setting (default)
JP1 3 pin Clear CMOS
1-2: Normal
2-3: Clear
JP1
1
JP3 3 pin BIOS protection
1-2: Disabled
2-3: Enabled
JP3
1
JP4 3 pin CPU frequency
select
1-2: 100MHz
2-3: 133 MHz
JP4
1
8