IMPORTANT: If no water is coming out of the water pump indicator hole, stop engine and check cooling water
intake for obstruction. No obstruction may indicate a water pump failure or blockage in the cooling system. These
conditions will cause the engine to overheat. Have the outboard checked by your dealer. Operating the engine
while overheated may cause serious engine damage.
Gear Shifting
IMPORTANT: Never shift outboard into gear unless engine speed is at idle. Do not shift outboard into reverse
when the engine is not running.
• The outboard has three gear shift positions to provide operation. Forward (F), Neutral (N) and Reverse (R).
To Next Page
Loading...
Need help?
General
