EasyManua.ls Logo

Mercury VesselView 4 - Units, Alarms, and Network Configuration

Mercury VesselView 4
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 4 - Setup and Calibrations
Page 24 90-8M0074776 eng MAY 2013
Settings Menu Navigation
Menu Navigation
1. Press the pages button.
2. Press the right arrow button several times until the last icon is highlighted. The last icon is the Settings menu.
3. Press the enter button.
4. Press the left or right arrow buttons to navigate to the pages.
5. Press the enter button to enter the menu.
6. After changing the settings, press the pages button several times to return to the settings icon.
a - Pages button
b - Left arrow button
c - Right arrow button
d - Enter button
System
The System menu allows you to format the time and date, turn buzzers and horns off or on, change various lighting
parameters, import a graphic for a customized splash screen, turn the simulation program on (this is generally used at the
dealership level), and identifies the software version.
The greater‑than sign ( > ) indicates additional menu choices.
Systems
Language Select the desired language
Time >
Change time and date format
Automatic time update is only available if a GPS is connected.
Buzzer >
Key Beeps > Off, Quiet, Normal, Loud
Alarm Beeps On (checkmark), off (no checkmark)
Backlight >
Level > 0–100%
Night Mode On (checkmark), off (no checkmark)
Network Update On (checkmark), off (no checkmark)
Local Gain > 0–100%
Image Viewer > SD Card Selection
Simulate On (checkmark), Off (no checkmark)
Restore Defaults All Settings, Engine Limits, Alarm History
About Display Software Version
Preferences
The Preferences menu allows you to :
Select which engines are to be displayed, the helm number, device number, and if the display is visible at the helm
Enable an ambient temperature sensor readout
Set the auto‑cycle interval
Turn off or on autopilot or skyhook popup screens
Turn data boxes on or off
Turn popup warnings on or off
Adjust the scroller bar auto‑hide delay time and select which scroller bar icons are to be displayed
Turn on or off the startup check list
Turn on or off the trim tab display
Select the type of cruise or SmartTow control.
The greater‑than sign ( > ) indicates additional menu choices.
51606
a
b
c
d

Table of Contents

Other manuals for Mercury VesselView 4

Related product manuals