Mercusys ME50G User Manual

12
Chapter 3 Customize Your Network
Click the icon of the Internet/Router/Range Extender/Clients to view corresponding
information.
3.2 Congure Wireless Network
If you want to extend another host network after Quick Setup, you can refer to
this section. Moreover, you can change the wireless settings for your extended
networks.
Visit http://mwlogin.net, and log in with the password you set for the extender.
• To extend another host network:
1. Go to Wireless > Connect to Host Network.
2. Enable Connect to 2.4GHz Network and click WIRELESS SCANNER to find all
available networks.
3. Select the 2.4GHz host network you want to extend.
Note:
If the network you want to extend is on but not listed, please try the following steps.
· Move the extender closer to your router, and click Refresh in the top-right corner of the list.

Mercusys ME50G Specifications

General

Brand	Mercusys
Model	ME50G
Category	Extender
Language	English