Mercusys ME50G User Manual

20
Chapter 4 Use Your Extender as an Access Point
Chapter 4 Use Your Extender as an Access Point
The extender can work as an access point, transforming your existing wired network
to a wireless one.
Wired Router Extender Devices
Ethernet4Ethernet3Ethernet1Ethernet2Internet
Ethernet4
Ethernet
Internet
4.1 Set Up the Extender as an Access Point
1. Connect your computer to the extender via an Ethernet cable.
2. Visit http://mwlogin.net, and log in with the password you set for the extender.
3. Click Change Mode in the top right corner of the page. Select Access Point Mode
and click OK. The extender will reboot and switch to Access Point mode.
4. Visit http://mwlogin.net, and log in with the password you set for the extender.
5. Go to Settings > Quick Setup to congure your extender.
1 ) Customize your wireless SSID and password and click NEXT.

Mercusys ME50G Specifications

General

Brand	Mercusys
Model	ME50G
Category	Extender
Language	English