33
Chapter 5 Manage the Extender
click Restore.
2. Wait a few minutes for the restore and reboot.
Note: During the restore process, do not power o or reset the extender.
• To reset the extender to factory default settings:
1. Click Factory Restore to reset all settings, or click Restore if you want to keep
your login and cloud account information.
2. Wait a few minutes for the reset and reboot.
Note:
1. During the reset process, do not power off or reset the extender.
2. We strongly recommend you back up the current configuration settings before resetting the extender.
6.6 Change Admin Account
The account management feature allows you to change your login password of the
web management webpage.
1. Visit http://mwlogin.net, and log in with the password you set for the extender.
2. Go to Settings > System Tools > Admin Account.
3. Enter the old password. Then enter the new password twice (case-sensitive) and
save the settings.
To Next Page
Loading...
