EasyManuals Logo

Mercusys MR1800X User Manual

Mercusys MR1800X
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
17
Chapter 4 Congure the Router in Wireless Router Mode
IPTV/VLAN - Select to enable the IPTV feature.
Mode - Select the appropriate mode according to your ISP.
LAN 1/2/3 - Assign your LAN port to whether function as the internet supplier or as the
IPTV supplier.
4. 2. 6. DHCP Server
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary, and
you can reserve LAN IP addresses for specified client devices.
To specify the IP address that the router assigns:
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to Advanced > Network > DHCP Server and locate the DHCP Server section.
1. Tick the Enable checkbox.
2. Enter the starting and ending IP addresses in the IP Address Pool.
3. Enter other parameters if the ISP offers. The Default Gateway is automatically filled in
and is the same as the LAN IP address of the router.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercusys MR1800X and is the answer not in the manual?

Mercusys MR1800X Specifications

General IconGeneral
BrandMercusys
ModelMR1800X
CategoryNetwork Router
LanguageEnglish

Related product manuals