44
Chapter 4 Congure the Router in Wireless Router Mode
3. In the Client IP Address filed, enter the range of IP addresses (up to 10) that can be leased
to the devices by the PPTP VPN server.
4. Set the PPTP connection permission according to your needs.
• Select Allow Samba (Network Place) access to allow your VPN device to access your
local Samba server.
• Select Allow NetBIOS passthrough to allow your VPN device to access your Samba
server using NetBIOS name.
• Select Allow Unencrypted connections to allow unencrypted connections to your
VPN server.
5. Click SAVE then configure the PPTP VPN connection account for the remote device, you
can create up to 16 accounts.
1 ) Click Add.
2 ) Enter the Username and Password to authenticate devices to the PPTP VPN Server.
3 ) Click ADD to save the information.