59
Chapter 4 Congure the Router in Wireless Router Mode
2. Select the start time from the drop-down list in the Start fields.
3. Select the end time from the drop-down list in the End fields.
4. Click SAVE.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log in to
the router successfully; otherwise, time-based functions will not take effect.
4. 10. 9. Language
This function allows you to set the language for the system.
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to Advanced > System > Time & Language.
3. In the Language section, choose your desired language.
4. Click SAVE.
4. 10. 10. Reboot
Some settings of the router will take effect only after rebooting, and the system will
reboot automatically. You can also reboot the router to clear cache and enhance running
performance.
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to Advanced > System > Reboot, and you can restart your router.
• To reboot the router manually:
Click REBOOT, and wait a few minutes for the router to reboot.
• To set the router to reboot regularly:
1. Tick the Enable box of Reboot Schedule.
To Next Page
Loading...
