Chapter 3 –Connect to a Wireless Network
Figure 3-1
2. The Network page will display all wireless networks that are available in your area. To
connect to a network, simply highlight the wireless network name and click Connect. SSID
(Service Set Identifier) is the name of the wireless network. The adapter will automatically
connect to your target network next time if you tick Connect automatically.
Figure 3-2
3. You will be prompted different windows when you choose wireless network of different
security types.
1) Wireless network of WPA/WPA2-Personal
If you selected a wireless network of the security type WPA/WPA2-Personal, you will be
150Mbps Wireless N Nano USB Adapter 9
To Next Page
Loading...
