Chapter 3 –Connect to a Wireless Network
Figure 3-7
6. To view more information about the network currently connected, click Status in the tools
section and the page will display information such as the network type, channel and wireless
mode.
Figure 3-8
3.2 To connect using WPS
WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing
network quickly.
If the wireless router supports WPS, you can establish a wireless connection between wireless
card and router using either Push Button Configuration (PBC) method or PIN method. Three WPS
connection methods are listed in the following parts.
150Mbps Wireless N Nano USB Adapter 12
To Next Page
Loading...
