Chapter 3 –Connect to a Wireless Network
Figure 3-12
2. The adapter will be connecting to the target network.
Figure 3-13
3. When Figure 3-11 appears, you have successfully connected to the network.
3.2.2.2. Enter a PIN into your AP device
1. Open MWCU and click WPS tab. Select Enter the PIN of this device into my access point
or wireless router. In the field beside PIN, you will see the PIN value of the adapter which is
randomly generated. Click Connect to continue.
150Mbps Wireless N Nano USB Adapter 15
To Next Page
Loading...
