Chapter 4 – Management
Figure 4-2
Figure 4-3
The following items can be found on the screen.
¾ Profile Name: Enter a name for your profile (e.g. office1and office2). The same name is not
allowed. Please also note that no space is allowed between words.
¾ SSID: Select the target network from the drop-down list.
¾ Network Type: Select the network type. If you are connecting to a wireless router or access
point, select Infrastructure. If you are connecting to another wireless client such as an
adapter, select ad-hoc.
¾ Security Type: Select the security type from the list. Four options are available: WPA/WPA2,
WPA-PSK/WPA2-PSK, WEP and None. The security type should be the same as on your
router or access point, otherwise, you will not be able to build a successful connection.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection.
The key must be the exact same key entered on your wireless router or access point. None
stands for no security. It is recommended to enable WPA-PSK/WPA2-PSK on your wireless
router or access point before configuring your wireless adapter.
150Mbps Wireless N Nano USB Adapter 25
To Next Page
Loading...
Need help?
General
Weight and Dimensions
