300Mbps Enhanced Wireless N Router User Guide
- 17 -
2. If your ISP provides the DHCP service, select Dynamic IP, and the router will automatically
get IP parameters from your ISP.
Renew - Click to renew the IP parameters from your ISP.
Release - Click to release the IP parameters.
M TU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks
is 1500 bytes. Do not change the default MTU Size unless required by your ISP.
Manually set DNS server - If your ISP gives you one or two DNS addresses, select this
option and enter the primary and secondary addresses into the corresponding fields.
Otherwise, the DNS servers will be assigned dynamically from your ISP.
Host Name - This option specifies the host name of the router.
Get IP with Unicast DHCP - A few ISPs' DHCP servers do not support the broadcast
applications. If you cannot get the IP Address normally, you can choose this option. (It is
rarely required.)
Click Sav e to make the settings effective.
To Next Page
Loading...
