300Mbps Enhanced Wireless N Router User Guide
- 45 -
IP Address/Domain Name - Enter the IP address or domain name of the PC whose
connection you wish to diagnose.
Pings Packet Number - Specifies the number of Echo Request messages sent. The default
is 4.
Ping Packet Size - Specifies the number of data bytes to be sent. The default is 64.
Ping Timeout - Time to wait for a response, in milliseconds. The default is 800.
Tracert M ax Hops - Set the maximum number of hops (max TTL to be reached) in the path to
search for the target (destination). The default is 20.
Click Start to check the connectivity of the Internet.
The Diagnostic Results page displays the result of diagnosis.
5.5.9 System Log
Go to System Tools
Syste m Log, and then you can view the logs of the router.
Refresh - Refresh the page to show the latest log list.
Save Log - Click to save all the logs in a txt file.
Cle ar All Logs - All the logs will be deleted from the router permanently, not just from the
page.
1. Only one user can use the diagnostic tools at one time.
2.
Ping Packet Number, Ping Packet Size and Ping Timeout are Ping Parameters, and
Tracert Max Hop is Tracert Parameter.
To Next Page
Loading...
