300Mbps Enhanced Wireless N Router User Guide
- 25 -
11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients.
11g only - Select if you are using only 11g wireless clients.
11b only - Select if you are using only 11b wireless clients.
Channel width - Select the channel width from the drop-down list. The default setting is
Aut o, which can adjust the channel width for your clients automatically.
Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the wireless
router will broadcast its name (SSID) on the air.
AP Isolation - Select this checkbox to enable the AP Isolation feature that allows you to
confine and restrict all wireless devices on your network from interacting with each other, but
still able to access the Internet. AP isolation is disabled by default.
5.2.2 Guest Network
Go to Wire le ss
Guest Networ k, you can configure the settings for the wireless guest network
on this page.
Guest Network - Click to enable or disable the Guest Network function here.
SSID/Password - Set the network name and password for Guest Network. Password may
contain 8-63 characters. It is recommended you use a combination of numbers, letters and
symbols.
Access my local ne twork - If Yes is selected, the wireless devices on the guest network are
able to access your local network. The default value is No.
Upstream Bandwidth - The upload speed through the WAN port for Guest Network.
Downstream Bandwidth - The download speed through the WAN port for Guest Network.
To Next Page
Loading...
