300Mbps Enhanced Wireless N Router User Guide
- 23 -
Host - The name of the controlled computer in the LAN.
M AC Ad d r e ss - The MAC address of the controlled computer in the LAN.
IP Address - The assigned IP address of the controlled computer in the LAN.
Status - Displays whether the MAC and IP address are bound or not.
Bind - Click
to add an entry to the IP & Mac binding list.
Click Refresh to refresh all items.
To add an IP & MAC Binding entry, follow the steps below.
1. Click Ad d.
2. Enter the Host name.
3. Enter the M AC Address of the device.
4. Enter the IP Address that you want to bind to the MAC address.
5. Click Save .
To edit an existing entry, follow the steps below.
1. Find the entry in the table.
2. Click
in the Edit column.
3. Enter the parameters as you desire, then click Save.
To delete existing entries, select the entries in the table, then click Delete Selected.
To delete all entries, click Delete All.
5.2 Wireless
There are three submenus under the Wireless menu: Host Network, Gue st Network and WDS
Bridging. Click any of them, and you will be able to configure the corresponding function.
To Next Page
Loading...
