300Mbps Enhanced Wireless N Router User Guide
- 42 -
• The default IP address: 192.168.1.1
• The default Subnet Mask: 255.255.255.0
5.5.5 Backup & Restore
Go to System Tools
Backup & Restore, and then you can save the current configuration of the
router as a backup file and restore the configuration via a backup.
Click Backup to save all configuration settings as a backup file to your local computer.
To upgrade the router's configuration, follow the steps below.
1. Click Browse to locate and select the configuration file which you want to restore.
2. Click Restore to update the configuration with the file you have selected.
All your custom settings will be lost when defaults are restored.
1. All current configurations will be lost once the router is restored.
2. To avoid any damage, keep the device powered on during the process
3.
After the upgrade process is complete (about 20 seconds), the device will reboot
automatically.
To Next Page
Loading...
