Mercusys MW325R - Page 40

MW325R
300Mbps Enhanced Wireless N Router User Guide
- 36 -
 Refresh - Click to update the current UPnP settings List.
5.4.4 Advanced Routing
Go to Advanced Use rs
→
Advanced Routing, and then you can configure the static routing and
view system routing list. Advanced routing is used to predetermine a fixed route for the network
information packets to reach a specific host or network.
 Static Routing
 De stination Address - The address of the network or host that you want to assign to a static
route.
 Subnet Mask - The Subnet Mask determines which portion of an IP Address is the network
portion, and which portion is the host portion.
 Ne xt Hop - The IP Address of the gateway device that allows for contact between the router
and the network or host.
 Edit - Here you can edit an existing entry.
 Add - Click to add a new rule entry.
 Delete All - Click to delete all the entries in the table.
 Delete Selected - Click to delete selected entries in the table.
To add a static routing entry:
1. Click Add.
2. Enter the parameters in the corresponding fields.
3. Click Sav e to make the settings effective.