300Mbps Enhanced Wireless N Router User Guide
- 40 -
3. Enter the port number to be used to access the router between 1024 and 65535. The default
value is 8888.
4. Click Sav e.
5.5.2 Time Settings
Go to System Tools
Ti me Se t tin gs, and then you can configure the time on the following page.
Time Zone - Select your local time zone from this drop-down list.
Date /Time - The router automatically obtains GMT from the Internet based on the time zone
you select.
To change the time settings, follow these steps:
1. Select your local time zone from the drop-down list.
2. Click Sav e.
1. To access the router, you should type your r
outer's WAN IP address into your browser's
address field, followed by a colon and the custom port number
http://202.96.12.8:8080). After en
tering the correct password, you will be able to access
the router's web management page.
2. Be sure to set a very secure password for the router.
This setting will be used for some time-based functions such as Parental C
ontrols and Access
Control. Please specify your time zone before you configure these functions.
To Next Page
Loading...
