INSTRUCTION MANUAL ME-104 8
stopped until START/STOP button is pressed. Then, the cycle will resume to the previous point
(first, it’s necessary to remove the causes of the problem and realize if the mattress need to be
re-introduced. In this case, the best is turn the machine OFF an the ON to start to work from the
beginning)
By open any of the doors, every movements of the machine are cancelled and the machine
status is moved to STOP. After close it, the machine remain stopped until START/STOP button
is pressed. Then, the cycle will resume to the previous point
The meanings of the lights are:
• Green light: the machine will accept a new mattress to wrap
• Yellow light blinking: the machine is working at any point
• Yellow light steady: the machine has been stopped by the green button, in the middle of
a cycle
• Red light blinking: emergency stop is pressed or emergency wire is pulled or a door is
opened or an alarm has occurred. The screen shows the status
• Red light steady: emergency has been eliminated, but the machine is not working until
START/STOP will be press
To Next Page
Loading...