INSTRUCTION MANUAL ME-104 9
5. MANTENIANCE
EVERY WEEK: remove the waste from the cutting cylinder case in order to avoid damages
EVERY WEEK: check the oil level on the compressed air filter. Refill if necessary
EVERY MONTH: clean the air filter on the control cabinet
EVERY MONTH: test the differential switch, by acting over the TEST button
• CARE OF THE BLADES AND TEFLON COVERS
The blades that cut the film are maintenance free and under normal situations last a lot. When
the blade results damaged it’s necessary to exchange for a new one. For replace the blade,
dismount the cover, untaught and pull carefully the old one and insert the new one
The Teflon covers last between 30.000 and 100.000 processes, depending on the gross of the
film and the heat conditions. When they are half used up, silicone sprayed could help to last
longer.
For covers substitution, please use self-adhesive 0,15 mm thick Teflon fabric
• REPARATION OF RODLESS CYLINDERS:
4
1
2
5
3
REPAIR KIT
1. air connection
2. end caps
3. out seal strip
4. inner seal strip
5. shuttle
To Next Page
Loading...