Meridian DSP5200 User Manual

10
DSP5200 and
DSP5200HC
Specifications
Connections
Digital co-axial input and output.
Meridian BNC Comms input and output.
RJ45 input and output, providing balanced digital,
Meridian Comms, and power.
Digital formats
44.1–96kHz. FIFO locks at 44.1, 48, 88.2, or
96kHz ±150ppm.
PCM using IEC958, or MHR connection support with
auto-detection.
Signal processing
1 x Motorola 56367 running at 150MHz.
4 x 24-bit Multi-bit delta-sigma DACs with 128x
oversampling.
Crossover linear-phase ±30º at 2.6kHz.
Output stages
Power amplifiers: Complementary bipolar design, with
output-stage error correction and twin loop design.
Bass: 2 x 75W.
Treble: 75W.
Acoustic
2  way.
Ported bass enclosure.
Isolated mid enclosure.
Bass drive unit: 2 x 160mm (6") custom
polypropylene driver using phase plug.
Treble drive unit: 1 x 25mm (1") Meridian piston in
short horn, aluminium dome with silver voice-coil.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Characteristics
Distortion typically <0.02% up to full power at all
frequencies.
Noise and hum <-94dBr at all volume settings.
Acoustic output typically >108dB spl @ 1m.
Acoustic noise <15dB spl @ 1m.
Frequency response in room response within 3dB,
35Hz-20kHz.
Cabinet
Entire speaker manufactured from interlaminated
panels.
Individually covered grilles for bass units.
Finished in black or silver high-gloss lacquer, satin
Santos rosewood, natural stain maple, black ash, or
cherry.
8-character display with system lights.
DSP5200: 300mm x 903mm x 356mm (11.8" x
35.6" x 14.0") (W x H x D).
DSP5200HC: 735mm x 201mm x 267mm (29.0" x
7.9" x 10.5") (W x H x D).
35kg (77lb) each.
Power
100-125; 200-250V AC 50-60Hz.
20VA standby; 600VA max.
Meridian Audio reserves the right to amend product
specifications at any time.
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Meridian DSP5200 Specifications

General

Brand	Meridian
Model	DSP5200
Category	Speakers
Language	English