33
Configuring the DSP
loudspeakers
Configuring the DSP loudspeakers
This chapter explains how to configure the DSP loudspeakers to suit the
other equipment in your system.
The first stage in configuring the DSP loudspeakers is to choose
one of the standard settings, and these are designed to set all of the
parameters to their most common values. You can also configure each
setting individually for applications not catered for by one of the standard
settings.
Once you have configured the DSP loudspeakers you will probably
never need to change the configuration, unless you alter the equipment
connected to your system at a later stage.
To Next Page
Loading...
Need help?
General
