25
Connecting up the
DSP loudspeakers
Positioning the digital loudspeakers
To obtain the best sound
For best results adjust the position of the loudspeakers
while listening to music.
If possible, have the most acoustically absorbent wall in
the room behind the front speakers. Ideally have each
DSP loudspeaker at least 0.5m (20") from a corner,
and position them approximately 0.25m (10") from the
wall.
If you are using a DSP loudspeaker as a centre
channel, place the speaker centrally between the main
left-right pair and, if possible, arrange for the treble
units of the three speakers to be approximately the
same height.
You can configure the frequency response of the DSP
loudspeakers to compensate for a position close to a
wall or corner; see
To adjust the frequency response
,
page 38.
To Next Page
Loading...
Need help?
General
