MERLYN 8 Series User Manual

INSTALLATION GUIDE
Bifold Door
Shower wall
Series 8 Bifold door/Shower wall
Corner Door
NOTE: When the products is being used as a Bifold in a recess or with a side panel it can be
used with or without a shower tray as it come with a bottom optional frame section.
We do not recommend using the door on a shower tray when used as a shower wall or corner
door as water tightness cannot be guaranteed as there is no bottom frame available.

MERLYN 8 Series Specifications

General

Magnetic Seals	Yes
Glass Thickness	8mm
Finish	Brushed Nickel
Reversible	Yes
Glass Finish	Clear
Frame Finish	Brushed Nickel
Material	Aluminum
Installation Type	Wall Mount
Height	1950mm

Summary

Important Information and Adjustments

Bifold Door Adjustment in Recess

Details specific size adjustments for Bifold doors when installed in a recess.

Shower Wall Adjustment

Provides adjustment specifications for shower wall installations.

Corner Door Adjustment

Outlines the adjustment ranges for corner door configurations.

Fixing Kit and Tools

Fixing Kit Components

Lists and illustrates all components included in the fixing kit for installation.

Tools Required for Installation

Illustrates the necessary tools to be used during the installation process.

Installation Procedure

Shower Tray Leveling and Sealing

Ensures the shower tray is level in all directions and properly sealed to the wall.

Determining Profile Position

Instructions on determining the correct distance for profile placement.

Door Handing and Bracket Setup

Reversing Handing

Steps to reverse the door handing from left to right.

Bracket and Profile Assembly

Guidance on removing and refitting brackets and profiles.

Fitting and Sealing Details

Wall Profile Drilling

Instructions for drilling holes in the wall profile for fixing screws.

Seal Placement Tips

Tips for correctly fitting seals to ensure water tightness.

Seal Trimming and Magnet Alignment

Bottom Seal Trimming

Instructions for trimming seals and ensuring proper alignment.

Magnet Profile Alignment

Steps to align the magnet profile and mark hole positions on the wall.

Luna Rail Installation and Warnings

Luna Rail Fitting

Procedure for placing the Luna rail into the closing side and hinged side.

Bottom Frame Usage Warning

Warning regarding the use of the bottom frame only for Bifold configurations.

Sealing Instructions

Inside Sealing

Instructions for sealing the inside between the wall profile and the wall.

Outside Sealing

Instructions for sealing the outside between the glass/rail/profile and the tray.

Corner Door Specifics

Pivoting Side Seal Trim

Trimming excess seals on the hinged side of both seals.

Central Hinge Seal Alignment

Ensuring the bottom seal is flush with the outside face of the upright seal.

Magnetic Side Seals

Details on seals and angled magnets for the magnetic side moving panel.

Final Sealing and Usage

Corner Door Sealing (Inside/Outside)

Sealing instructions for corner doors, inside and outside, between profiles and tray.

Post-Sealing Usage Restriction

Advises not to use the enclosure for 24 hours after sealing.