Risk of scalding from hot steam
If water or cleaning agent is sprayed into the hot cavity, steam will be produced and this may scald. To minimise this
risk:
• Before starting cleaning tasks, wait until the cavity has cooled to below 50°C / 122°F or use the 'Cool Down'
function to cool the cavity as described in Section 2G: Cool down procedures in the Operations Guide.
• Step back from the appliance to avoid the hot steam and vapour escaping through the open appliance door.
Risk of irritation to skin, eyes and respiratory system from cleaning products
Direct contact with the cleaning or protective chemicals will irritate the skin, eyes and respiratory system. To minimise
this risk:
• Do not inhale the vapours or spray mist from the cleaning and protective chemicals.
• Do not let the cleaning or protective chemicals come into contact with skin, eyes or mucous membranes.
• Do not spray cleaning or protective chemicals into a cavity.
• Wear personal protective equipment as detailed at the beginning of this section.