9
(1) OVERLOCK PRESSER FOOT
3. OPTIONAL ACCESSORIES
Optional presser feet specially prepared for this machine are available at your dealer. The snap-on type
presser foot used on this machine allows easy removal and replacement.
(2) EXTENSION TABLE SET
Extension Table Set N10592
Including extension table, four legs and push pin. Assemble the extension table
and legs according to the illustrations provided with the table. The push pin is
used in the small holes in the table to hold your fabric in place when sewing
circles.
Elastic Foot G20804A
The Elastic Foot guides and stretches narrow elastic (6-12mm, 1/4~1/2”) wear,
lingerie and other elastic insertion techniques.
Blindhem & Lace Foot A1A154A
The Blindhem Foot is perfect for sewing invisible hems and for applying lace.
The hem is sewn, overcast and trimmed in one step.
Beading Foot A1A284A
The Beading Foot smoothly guides beads and pearls through a channel on the
foot for easy application on garments or crafts.
Piping Foot A1A324A
The Piping Foot is perfect for inserting packaged piping into seams and on
edges for a tailored finish. The trim is sewn between the two layers of fabric in
one step. A groove under the foot helps guide the piping. You can also create
your own piping for a custom finish.
The Piping Foot makes it fast and easy to cover cording with fabric and to insert
piping into seams for a professional look!
Taping Foot A1A334A
The Taping Foot is used to apply seam tapes to seams to prevent stretching. It
is especially good for stabilizing shoulder seams. With this foot you can
reinforce and construct seams in one step.
Shirring Foot A1A234A
The Shirring Foot easily makes and attaches shirrs in one step to garments,
pillows, and other home decorative items with this shirring foot.
To Next Page
Loading...
Need help?
General
