Why does the thread keep breaking on my Merrylock 2020 Sewing Machine?
If the thread breaks on your Merrylock Sewing Machine, try these solutions: First, check the threading. Second, insert a new needle, as the current one may be bent or have a blunt point. Finally, loosen the thread tension.
What to do if my Merrylock Sewing Machine skips stitches?
If your Merrylock Sewing Machine is skipping stitches, try inserting new needles, as the current ones may be bent or have a blunt point. Make sure to use only HAx1(130/705H) overlock needles. Also, check the threading.
How to fix irregular stitches on my Merrylock Sewing Machine?
To fix irregular stitches on your Merrylock Sewing Machine, balance the thread tension and check the threading.
Why is the fabric puckering when I sew with my Merrylock 2020 Sewing Machine?
If the fabric puckers when sewing with your Merrylock Sewing Machine, try loosening the thread tension. Also, for thick layers of fabric, compress them with a conventional machine before using the overlock.
General| Brand | Merrylock |
|---|---|
| Model | 2020 |
| Category | Sewing Machine |
| Language | English |
Steps to set up the thread guide holder, extend it, and position it correctly for sewing.
How to use the anti-spill net with synthetic threads to prevent them from spilling off the cone.
Instructions for fitting the spool cap onto a regular thread spool for machine use.
Step-by-step guide for threading the upper looper, including thread path and tension disc placement.
Instructions for threading the lower looper, following color-coded guides and looper area.
Guide for threading the overedge right needle, detailing thread path through guides and needle eye.
Procedure for threading the overedge left needle, including thread guides and needle eye.
Suggested tension settings and balancing tips for the 2-thread wrapped edge overlock stitch.
Guidance on tension settings and adjustments for the 2-thread overedge stitch.
Recommended tension settings and troubleshooting for balancing the 3-thread overlock stitch.
Tension settings and balancing advice for the 3-thread flatlock stitch.
Tension settings and balancing procedures for the 3-thread ultra stretch mock safety stitch.
Guidance on tension settings and balancing for the 4-thread ultra stretch mock safety stitch.
Instructions for setting up the machine and performing a 3-thread standard rolled hem.
Steps for setting up and sewing a 3-thread rolled hem using upper looper thread wrapping.
How to set up and sew a 2-thread standard rolled hem.
Procedure for sewing a 2-thread rolled hem with lower looper thread wrapping.
Setting up the machine, choosing needles, and balancing tension for a flatlock decorative seam.
Steps for sewing a flatlock seam with fabric placed wrong sides together.
Procedure for decorative flatlocking, including knife position and fabric folding.
Guide for turning outside corners, including cutting, stitching, and fabric manipulation.
Steps for turning inside corners, including cutting, sewing, and fold adjustment.
Instructions for cleaning the overlock machine, focusing on lint removal from the looper and knife area.
Procedure for oiling the internal working parts of the sewing machine, specifying oiling points.
Guide for removing and replacing the snap-on type presser foot on the machine.
To Next Page
