20. SELECTION OF STITCHES
This machine is capable of producing various types of stitches according to the combination of needle positions,
threading methods, tension adjustment and the use of convertible right looper/ .converter
Stitch Type Reference
Page
28
1. Two-thread 1-needle 2-thread stitch is used for
Wrapped Edge
Overlock
It is also ideal for rolled and blind hemming.
A 4 mm and 6 mm overlock seam width
can be obtained by changing the needle
position.
2. Two-thread 1-needle 2-thread stitch is used for
Overedge overedging common fabrics. It is also
ideal for flatlock (butted or lapped) seams
and blind hemming. A 4 mm and
6 mm overedge seam width can be
obtained by changing the needle position.
Overlock
overedging and seaming on common
fabrics. A 4mm and 6 mm overlock seam
width can be obtained by changing the
needle position.
4. Three-thread 1-needle 3-thread stitch is used for
Flatlock butted or lapped seams and ornamental
stitching with decorative thread. Also,
a 4 mm and 6 mm flatlock width can
be obtained by changing the needle
position.
5. Three-thread 2-needle 3-thread stitch that is ideal for
Ultra-Stretch lightweight, extremely stretchy fabrics
Mock Safety such as tricot and spandex.
Stitch
6.Four-thread Ultra- 2-needle 4-thread stitch that is ideal
Stretch Mock for medium to heavyweight stretchy
Safety Stitch fabrics such as double knits and swim
wear.
3. Three-thread 1-needle 3-thread stitch is used for
seaming lightweight or stretch fabrics.
7. Three-thread 1-needle 3-thread stitch is used for sewing
Rolled Hem narrow rolled hems.
38
31
32
33
34
35
36
To Next Page
Loading...
Need help?
General
