Merrylock 2020 - Converting Upper Looper to 2-Thread Converter

12
To engage the , insert the sharp part into
the
2-thread converter
eye of upper looper.
When not threading the upper looper, the 2-thread converter
must be engaged into the upper looper eye.
When using the upper looper, the must
be
2-thread converter
disengaged.
Caution:
Be sure to turn off power switch
To disengage the 2-thread converter, raise the handle of
upper looper according to picture .
A raised point located in the trough of 2-thread converter
must be inserted and fixed in the eye of the 2-thread
converter.
1
2
3
1
2
3
3
To Use the 2-thread converter
To Disengage to Upper Looper
10. TO CONVERT UPPER LOOPER TO
2-THREAD CONVERTER