5
4
1
N
2
6.5
N
5.5
N
24
As shown on the illustration, turn the dial
counter clockwise to increase width of cutting, and
clockwise to decrease width of cutting.
The presser foot pressure of this machine is
pre-adjusted at the factory to suit the sewing of
medium weight fabrics.
Most of the materials do not require adjustment of
presser foot pressure. However, there are some
instances where adjustment is necessary, such as
when sewing lightweight and heavyweight fabrics.
In such case, N for normal, 1 for the lightest pressure,
and 5 for the heaviest.
For lightweight fabric...Decrease the pressure
For heavyweight fabric...Increase the pressure
17. HOW TO ADJUST THE PRESSER
FOOT PRESSURE
Width adjustment knob
To Next Page
Loading...
Need help?
General
