1. .........................................................Principal Parts.
2. ...........................................Accessories...................
3. ..................................................Needle Information.
4. .....................................How to Open Looper Cover
5. .....................
.Principal Parts Behind Looper Cover.
6. .....................................Preparation prior to sewing.
7. ...........Removal and Replacement of Clean Pocket
8. Preparation prior to sewing......................................
1 . How to Remove and Insert Needles........................
2
*Needle position.........................................................
*To remove needle(s).................................................
*To insert needle(s)....................................................
1 . Threading the Machine...........................................
3
*Threading diagram...................................................
*Understanding the color code..................................
*To thread the machine correctly................................
1) Threading the upper looper (Green)...................
2) Threading the lower looper (Red).......................
4) Threading the overedge left needle (Orange).....
21. ........................
.Handy Reference Chart..............
22. Suggested Tension Setting..................................
4
Page Page
30
31
31
5
7
7
8
8
8
9
10
10
10
10
11
12
12
12
13
13
13
14
14
16
17
19
20
*Setting up the thread guide holder............................
*Anti-spill net..............................................................
*Spool cap..................................................................
9. How to Disengage Movable Upper Knife................
1 . To Convert upper Looper to 2-thread converter.....
0
*To use the ..................................2-thread converter
*To disengage to upper looper...................................
11. Standard overedge and Rolled Hem Stitching........
*To sew standard overedge........................................
*To sew rolled hem.....................................................
14
14
15
15
15
16
23. How to Sew a Rolled hem...................................
1) 3-thread standard rolled hem stitching..............
2) 3-thread upper looper thread wrapped
rolled hem stitching...........................................
3) 2-thread standard rolled hem stitching..............
4) 2-thread lower looper thread wrapped
rolled hem stitching...........................................
24. Stitch Variations and Sewing Techniques...........
*Decorative Flatlocking...........................................
*How to sew an overlock blind hem........................
*How to sew a pin tucks.........................................
*Turning square corners.........................................
*Pin placement.......................................................
*Securing the thread chain.....................................
25. Machine Maintenance.........................................
*Cleaning the machine...........................................
*Oiling the machine................................................
*How to replace the stationary knife.......................
*How to exchange light bulb...................................
26.Optional Accessories............................................
*Snap-on type presser foot.....................................
*Optional presser feet.............................................
1) Elastic foot........................................................
2) Blind hem foot..................................................
3) Shirring foot......................................................
4) Pearl/Sequin foot..............................................
5) Piping/Cording foot...........................................
6) Taping foot.......................................................
27. Troubleshooting Chart.........................................
28. Relationship between Cloth, Thread and Need...
29. Specification........................................................
37
38
38
39
39
41
42
43
43
44
45
45
46
46
46
47
48
49
49
50
50
50
50
50
50
50
51
52
53
1) 2-Thread Wrapped Edge Overlock....................
2) 2-Thread Overedge...........................................
3) 3-Thread Overlock............................................
4) 3-Thread Flatlock..............................................
.
5) 3-Thread Ultra Stretch Mock Safety Stitch........
6) 4-thread Ultra Stretch Mock Safely Stitch.........
32
33
34
35
36
1 . How to Change Threads / Tie on Method...............
4
1 . How to Adjust the Stitch length...............................5
1 . How to Adjust the Seam width................................6
*Width adjustment by changing needle position........
*Width adjustment with adjustment knob...................
1 . How to Adjust the Presser Foot Pressure...............
7
1 . Differential Feed......................................................8
*Gathered overedge...................................................
22
23
23
23
23
24
25
25
26
27
28
*Stretch overedge......................................................
19 .... Chaining Off and Test Sewing.............................
. Selection stitches....................................................
20
) Threading the overedge right needle (Blue)........3
TABLE OF CONTENTS
To Next Page
Loading...
Need help?
General
