Output Power Rating: 400 watts rms @ 8 ohms, 10% THD (includes preamp O/D THD) [note 1]
800 watts rms @ 4 ohms, 10% THD (includes preamp O/D THD) [note 1]
800 watts rms @ 2 ohms, 10% THD (includes preamp O/D THD) [note 1, 4]
Signal to Noise Ratio: -74dB (20-20kHz, unweighted)
Maximum Available Gain: 79dB, (EQ controls flat, passive mode)
Equalization: Bass: +14dB/-14dB @ 40Hz [note 2]
Low Mid: +14dB/-14dB @ 200Hz
High Mid: +14dB/-14dB @ 480Hz
Treble: +11dB/-14dB @ 4kHz [note 2]
Power Requirements: 100-120/220-240 VAC, 50/60Hz, 250W, auto-ranging power supply
Size: 10.59” (269mm) wide x 11.12” (282mm) deep x 3.04” (77mm) high [note 3]
Weight: approx. 5.5 lbs (2.49 kg)
[note 1]: area under the curve, factoring preamp harmonics management.
[note 2]: measured approx. 1 octave from knee
[note 3]: chassis dimensions include controls, handle and feet
[note 4]: impedance selector switch set to 2 ohm position
MESA/Boogie® continually develops new products and improves existing ones. For this reason, specifications and information in this
manual are subject to change without notice.
SERVICE INFORMATION
• USA /CANADA Customer Support:
For technical support, troubleshooting, tone questions, settings help and more...
707-778-6565 Monday-Thursday, 9AM-5PM Pacific Time
NOTE: If a Product Specialist is not available when you call (helping other customers), PLEASE leave a voice message with a
phone number and a good time to call and WE’LL CALL YOU BACK!
• INTERNATIONAL Customer Support:
For warranty and technical support, please contact your LOCAL MESA DISTRIBUTOR.
You may use this link to search the web for your local distributor’s contact information:
www.mesaboogie.com/support/locations.html
Specications
PAGE 11
To Next Page
Loading...
Need help?
General
