Need help?Do you have a question about the MESSKO ZT-F2.1 and is the answer not in the manual?
General| Brand | MESSKO |
|---|---|
| Model | ZT-F2.1 |
| Category | Transmitter |
| Language | English |
General safety guidelines for personnel involved in installation, operation, and maintenance.
Describes the intended application of the ZT-F2.1 transmitter with TRASY2 or replacement sensors.
Emphasizes compliance with accident prevention regulations and safe electrical practices.
Details the ZT-F2.1 transmitter's functionality, indirect winding temperature measurement, and load dependency.
Specifies installation in DIN EN 50216-4 type A1 thermometer pockets and oil filling requirements.
Lists conditions for testing the ZT-F2.1 transformer temperature transmitter in a test setup.
Explains compatibility with various dial-type thermometers and analytical instruments.
Provides instructions for assembling the ZT-F2.1 transmitter into the thermometer pocket.
Details the procedure for installing the temperature bulb of a dial-type thermometer.
Explains how to connect the current transformer to the ZT-F2.1 transmitter.
Describes connecting Pt100 measuring resistors using 2, 3, or 4-conductor techniques.
Details the connection for the 4...20mA analog output option.
Explains how to set the hot-spot gradient using DIP switches for a 2 A CT nominal current.
Provides formula and guidance for calculating hot-spot gradient when CT nominal current is not 2 A.
Instructions for checking the display readings against the dial-type thermometer.
Provides troubleshooting tips for high or low gradient displays and deviation correction.
States that the ZT-F2.1 transformer transmitter is maintenance-free.
Describes the safety circuit for diverting fault currents and overvoltage protection.
Lists technical specifications including dimensions, materials, operating conditions, and output signals.
Contains dimensional drawings of the ZT-F2.1 transmitter and connection details.
Provides DIP switch settings for hot-spot gradients from 4K to 50K with 2A nominal current.
Provides a diagram and dimensions for the replacement sensor accessory.
To Next Page