Meta System META EVOCAN - Page 7

7
NR° FUNCTION FUNCTION DESCRIPTION SUGGESTED SET-UP NOTES
21
Self arming type Type of self arming de nition Only engine immobilizer Use it only if request by the customer
22
ENABLE BLINKER
FLASHING
Blinker  ashing during ON/OFF Enabled To be de ned with customer
23
Number of blinking
during ON
Number of blinking during ON 2 Don’t modify it
24
Number of blinking during
OFF
Number of blinking during OFF 1 Don’t modify it
25
Pre-disarm
Complete disarming only if ID-TAG
is present
O
Only with paired TAG (to be de ned
with customer)
26
Enable BLE features
Function to enable the bluetooth
connections
On
Mandatory to pair the wireless Siren
and TAGs
27
Emulated PSA LIN Bus
Enabling the alarm unit LIN bus
line to be connected to the vehicle
O Don’t modify it
28
Instanting starter
immobilizer
Timing to start the starter
immobilizer during the Anti
Carjacking procedure
O
Don’t change it if the Anti Carjacking
function is disable
29
External starter
immobilizer type
Modality of the external starter
immobilizer
GML (C-NC) modality
Don’t change it if the external starter
relay was not installed
30
Anti Carjacking setting Anti Carjacking type All the doors monitored
Don’t change it if the Anti Carjacking
function is disable
31
Enable feature +30G
Enabling the +30G signal
monitoring
Disabled Don’t modify it
32
Minimum RSSI to
disarming by TAG
Fine tuning of TAG recognition
range
5 (0-10) Don’t modify it
33
ENABLE MAC N°1
Memory position for TAG B9.5
remote control
Enable Mandatory to pair the TAG
34
MODALITY OF MAC N°1
Model of BLE module to be
paired
ID-TAG
Select ID-TAG (to change the TAG
behaviour to remote control see the
note at page 6)
35
MAC address of device
N°1
Module Mac address xxxxxxxxxx
Insert the device ID code to be
memorized
36
ENABLE MAC N°2
Memory position for
TAG B9.5 remote control
Enable Mandatory to pair the TAG
37
MODALITY OF MAC N°2
Model of BLE module to be
paired
ID-TAG
Select ID-TAG (to change the TAG
behaviour to remote control see the
note at page 6)
38
MAC address of device
N°2
Module Mac address xxxxxxxxxx
Insert the device ID code to be
memorized
39
Enable MAC n°3 Disabled / Enable
40
Modality of MAC n°3 ID-Tag / Remote control
41
MAC address of device n°3 xxxxxxxxxx
42
Enable MAC n°4 Disabled / Enable
43
Modality of MAC n°4 ID-Tag / Remote control
44
MAC address of device n°4 xxxxxxxxxx
45
Enable MAC n°5 Disabled / Enable
46
Modality of MAC n°5 ID-Tag / Remote control
47
MAC address of device n°5 xxxxxxxxxx
48
M07 Siren pairing Memory position for M07 siren Disabled / Enable
Enable if the wireless M07 Siren have
to be paired
49
M07 Siren Mac Address Siren Mac Address xxxxxxxxxx
Insert the M07 siren ID code to be
memorized
50
B3 Module pairing Memory position for B3 module Disabled / Enable
Enable if the B3 Module have to be
paired
51
B3 Immobilizer Mac
Address
B3 Mac Address xxxxxxxxxx
Insert the B3 module ID code to be
memorized